Everyone wants to have an efficient home when it comes to heating and cooling, especially during the extreme summer and winter months in Minnesota. That’s why it’s important to give your thermostat the most help you can, making the job of heating and cooling your home easier and more efficient.
Let’s look at a few ways you can help your thermostat out this winter.
Lower Your Thermostat
One of the best ways you can get some good mileage out of your thermostat this winter is to lower it. Each degree you lower the thermostat decreases your fuel bill by about 3%! Going from 72°F to 68°F might not make much of a difference when it comes to comfort, but could easily shave 12% off your heating bill.
If your home still utilizes a coil thermostat, those do need to be cleaned occasionally. We offer thermostat cleaning and repair services, so just give us a call.
Change Your Furnace Filter
With a forced air system, regularly changing your furnace filter can save you up to 5% on your heating bill and reduce dust and other irritants in the air. The system as a whole will last longer and be less likely to break down with regular cleaning and maintenance.
A good rule of thumb is to change your furnace filter monthly during the heating season. Be sure to measure your filter before shopping, or set yourself up with our maintenance plan and we’ll take care of your furnace for you.
Send Heat Down With Ceiling Fans
While not everyone agrees that ceiling fans help reduce energy costs, some believe they can help move warm air from the top of the room to the bottom, better circulating the heat. Make sure your fan is in the “winter” – or clockwise – position to send air down to the floor. During the summer, it should run counter-clockwise.
Also, run the fan at the lowest speed so the breeze isn’t too strong. If you feel the fan is doing more cooling than assisting with circulating the heat, turn it off.
Get A New Programmable Thermostat
With a programmable thermostat, you can preset temperatures for different times of the day. This can be a real money-saver all year long.
Choose lower-energy settings when you’re sleeping or away from home, and use higher-energy settings when you are awake at home – for example, set it at:
- 70°F from 5 a.m.-8:30 a.m.
- 60°F from 8:30 a.m.-5:30 p.m.
- 70°F from 5:30 p.m.-11 p.m.
- 60°F from 11 p.m.-5 a.m.
Depending on your usage, you could save 10-20% on your energy bill.
Energy efficiency is an end goal for many businesses and homeowners. Energy efficiency is a great way to save money, maintain a clean and healthy environment as well as reduce your carbon footprint.
What Is A Home Energy Audit?
A home energy audit is performed by a licensed HVAC (Heating, Ventilation and Air Conditioning) contractor or energy auditor. The audit identifies all of the factors which are contributing to your HVAC system being inefficient, as well as potentially unhealthy.
A home energy audit starts by reviewing your energy bills over the past year or two, as well as asking you questions about how you use energy. This helps the auditor understand how energy is used in your home.
When many people think of energy audits, they think about the blower test. This is when the auditor places a large fan at one door of the house and turns it on while the rest of the doors and windows are closed, sucking air out of the building.
If air pressure falls quickly, it tells the auditor your home is sealed well. If the air pressure falls slowly, it means there are many leaks in your home where air is coming in. An infrared camera is used to pinpoint where the leaks are, as well as where insulation may be underperforming
An audit will also inspect the ductwork of your home, looking for leaks in the HVAC system itself.
Once these steps are completed, you’ll have the information you need to decide how to fix issues or make improvements to maximize your energy efficiency.
Why You Should Maximize Energy Efficiency With A Home Energy Audit
Identifies Problems Early
A home energy audit will help you identify problem areas of your home quickly and before any more energy (and money) is lost.
Whether you need additional insulation, patchwork on walls or around windows, duct repair or replacement, new doors or some general maintenance, catching it early can save you lots of money over the long run.
May Be Eligible For Rebates/Discounts
Once an audit is done and you’ve identified the work you might like to do, it’s time to investigate what rebates or discounts might be available.
If you’re part of an energy cooperative (a utility may offer this as well,) you may be eligible for rebates on the work you do to become more energy efficient. Caulking or weatherstripping windows, upgrading HVAC appliances, replacing windows/doors and more may be eligible.
The utility or cooperative may send someone to your home to inspect the work after it is done, and then issue the rebate, which can be up to 50% of your costs depending on the company and product.
As always, becoming more energy efficient could save you from 5-30% off of your energy bill after fixing and upgrading the areas identified in the home energy audit.
We believe in routine furnace maintenance as an investment in your equipment, your health, your checkbook and the environment.
With furnace maintenance, there are too many benefits to count, but we are going to count the 3 most commonly cited benefits by our furnace maintenance customers.
3 Reasons To Schedule Furnace Maintenance
1. Save Money Every Month
Guess how much your system can be affected by not being cleaned, measured, inspected, checked and maintained? You can lose up to 15% of your system’s energy! When you look at your energy bill, that is your money going out the window.
With a scheduled, regular maintenance plan from H&S Heating & Air Conditioning, we’ll keep your furnace running at peak efficiency to keep more money in your checkbook.
2. Save The Environment
56% of your home’s energy usage comes from heating and cooling, according to energysavers.gov. Your environmental footprint can be severely impacted through routine furnace maintenance and cleaning!
We would also suggest looking into newer, more efficient equipment when the time comes to replace your furnace if you’re interested in lowering your energy usage. We are partners with Ruud, which have some great furnaces for the energy-conscious consumer.
3. Save The Hassle
Modern, high-tech equipment contains many moving parts and is sensitive to the environment. It can be difficult to assess, maintain and repair with the proper expertise or equipment. With scheduled furnace maintenance, you know your furnace is being cared for correctly, saving you the hassle of figuring it out yourself, as well as trying to find someone to fix it again later.
Winter Is Coming
Soon, winter will be here and the energy bills will be coming with it. Be sure to schedule your furnace maintenance with H&S Heating & Air Conditioning so you won’t be left out in the cold!